Access a range of downloadable documents:
Go to Download area
Products / Food / Cabrito major
Order Information
| Luminaire | Code | |
|---|---|---|
| Recessed Rear Re-Lamping Canopy - fitting with integral control gear, lamp, diffuser c/w mains isolation via plug/socket & fused inlet. Viewing aperture fitted as standard on backplate to check lamp integrity. Ceiling thickness: 50-225mm | ||
| 150W | SON | C6RS150RTL |
| 250W | SON | C6RS250RTL |
| 400W | SON | C6RS400RTL |
| 250W | MBF | C6RM250RL |
| 400W | MBF | C6RM400RL |
| 150W | Metal Halide | C6RH150RTL |
| 250W | Metal Halide | C6RH250RTL |
| 400W | Metal Halide | C6RH400RTL |
| 150W | Induction (electrodeless) 60,000hr lamp life | C6RI150RL |
| 500W | Halogen | C6R500RL |
| Recessed Front Re-Lamping Canopy - fitting c/w integral control gear, lamp & diffuser. Ceiling thickness:10-170mm | ||
| 150W | SON | C6RS150FTL |
| 250W | SON | C6RS250FTL |
| 400W | SON | C6RS400FTL |
| 250W | MBF | C6RM250FL |
| 400W | MBF | C6RM400FL |
| 150W | Metal Halide | C6RH150FTL |
| 250W | Metal Halide | C6RH250FTL |
| 400W | Metal Halide | C6RH400FTL |
| 150W | Induction (electrodeless) 60,000hr lamp life | C6RI150FL |
| 500W | Halogen | C6R500FL |
| Surface-mounted Front Re-Lamping Canopy - fitting c/w integral control gear, lamp & diffuser | ||
| 150W | SON | C6SS150FTL |
| 250W | SON | C6SS250FTL |
| 400W | SON | C6SS400FTL |
| 250W | MBF | C6SM250FL |
| 400W | MBF | C6SM400FL |
| 150W | Metal Halide | C6SH150FTL |
| 250W | Metal Halide | C6SH250FTL |
| 400W | Metal Halide | C6SH400FTL |
| 150W | Induction (electrodeless) 60,000hr lamp life | C6SI150FL |
| 500W | Halogen | C6S500FL |
| Options & Accessories | Code | |
|---|---|---|
| Mains auxiliary standy module c/w E27 lampholder and 250W tungsten-halogen lamp | AUX | |
| Major prismatic pyramid polycarbonate diffuser Arrow type (mounting heights above 4.5m) | C6APYPC | |
| Major prismatic pyramid acrylic diffuser Triumph type (mounting height below 4.5m) | C6TPYAC | |
| 555x555mm Flat clear toughened glass diffuser (for surface & recess front re-lamping) | C6GLCF | |
| 580x580mm Flat clear toughened glass diffuser (for recess rear re-lamping) | C6GLCR |
Other information
- Integral power-on timer delay units are available for the Cabrito Major on request.
- Emergency - Remote only non-maintained versions on request.
- IP integrity will be dependent on the method of installation.
- Mains Auxiliary Standby Module - Actuates on energising during arc runup, also on mains interruption until arc restoration. Rated for use with single phase HID circuit up to and including 1kW Max. Aux Lamp Wattage 250W. (Other wattages available on request)
- IP ratings for Cabrito Minor & Major Canopy Fittings as given here distinguish between the front (situated below ceiling level) and the rear of fitting (situated above ceiling level for recessed versions).
- Recessed rear relamping versions of the Cabrito Major are supplied c/w IP65 plug/socket and lamp ‘healthy’ indicator mounted on the rear
surface of the luminaire