Access a range of downloadable documents:
Go to Download area
Products / Suspended Lighting / Cristo
Order Information
| Luminaire | Code | |
|---|---|---|
| 2 x 28W T5 | 2 x 28W T5 Fitting c/w high frequency ballast and lamp | CSC228HFL |
| 2 x 35W T5 | 2 x 35W T5 Fitting c/w high frequency ballast and lamp | CSC235HFL |
| 2 x 49W T5 | 2 x 49W T5 Fitting c/w high frequency ballast and lamp | CSC249HFL |
| 2 x 54W T5 | 2 x 54W T5 Fitting c/w high frequency ballast and lamp | CSC254HFL |
| 2 x 80W T5 | 2 x 80W T5 Fitting c/w high frequency ballast and lamp | CSC280HFL |
| Options & Accessories | Code | |
|---|---|---|
| Straight Connector | CSCSC | |
| 90° Connector | CSC9C | |
| “T” Shape Connector | CSCTC | |
| Cross Connector | CSCCC | |
| Louvre Section | CSCLS | |
| Small Cover Plate | CSCSCP | |
| Large Cover Plate | CSCLCP | |
| Open End Cap | CSCOEC | |
| Closed End Cap | CSCCEC | |
| 1.5M Stainless Steel Suspension Unit | CSC15S | |
| 2.5M Stainless Steel Suspension Unit | CSC25S |
Other information
Materials and Design
White powder coated rigid aluminium body and gear
cover. Steel gear tray. A high purity anodized aluminium
reflector and colour matched polycarbonate end caps and
interconnecting accessories.
Installation
Suitable for suspension via steel cable from a slot and
groove system arrangement on the rear of the body.
Surface mounting onto the ceiling is also possible directly
through the aluminium base.
Electrical
Cable entry is via an entry in the rear of the body of the
luminaire. Electrical connections are made to a 3-way
polyamide screwed terminal strip mounted on the gear
tray of the luminaire. The option of continuous through
wiring is available and must be specified when ordering
as outlined below.
Classification for Protection and Standards
Against electric shock Class 1 protected with earthed
metalwork. It is important that this product is electrically
installed according to the relevant IEE Regulations. Against
ingress of dust and moisture IP20 Technical Specification.
The Cristo range of luminaires is designed and
manufactured to meet the requirements of BSEN 60598 2-1.