Access a range of downloadable documents:
Go to Download area
Products / Amenity / Palma
Order Information
| Luminaire | Code | |
|---|---|---|
| Palma HID | ||
| 70W | SON fitting c/w integral gear, timed ignitor & lamp | BHPS70TL |
| 150W | SON fitting c/w integral gear, timed ignitor & lamp | BHPS150TL |
| 70W | Metal Halide fitting c/w integral gear, timed ignitor & E27 lamp | BHPH70TLO |
| 150W | Metal Halide fitting c/w integral gear, timed ignitor & E27 lamp | BHPH150TLO |
| 80W | MBF fitting c/w integral gear, & lamp | BHPM80L |
| Palma PL | ||
| 2 x 26W | fitting c/w high frequency ballast & lamps | BHP226HFL |
| 32W | fitting c/w high frequency ballast & lamps | BHP32HFL |
| 2 x 32W | fitting c/w high frequency ballast & lamps | BHP232HFL |
| 42W | fitting c/w high frequency ballast & lamps | BHP42HFL |
| 2 x 42W | fitting c/w high frequency ballast & lamps | BHP242HFL |
| 57W | fitting c/w high frequency ballast & lamps | BHP57HFL |
| Options & Accessories | Code | |
|---|---|---|
| Mains auxiliary standby module c/w E27 lampholder and 250W tungsten-halogen lamp | AUX |
Other information
• IP 54 240 Volts 50Hz - Nominal supply
• Suffix ‘O’ = Open-Fixture Rated Lamp
• Timed Ignitors - Fitted as standard in all single phase Hilclare Metal Halide, SON & Ceramic Metal Halide fittings up to 1kW, to protect control gear in lamp failure condition. Not fitted in 1kW/2kW cross phase. Thermal Protection of HID Control Gear, in compliance with prevailing regulations, is installed in Hilclare products as appropriate.
• Lamp colour temperatures - refer to page 104
• Emergency (Integral) - Telephone for the most suitable option.
• Emergency (Remote battery pack) - available with 35W tungsten-halogen lamp.
• Dimming - 3 - 100% digital dimming systems are available for all compact fluorescent versions of the Palma
• Ambient Operating Temperatures
-30°C to +25°C (SON)
-20°C to +25°C (MBF & Metal Halide)