Access a range of downloadable documents:
Go to Download area
Products / Amenity / Santos
Order Information
| Luminaire | Code | |
|---|---|---|
| 16W 2D | black die-cast aluminium base and clear prismatic diffuser. | DSL2D16BPHFL |
| 28W 2D | black die-cast aluminium base and clear prismatic diffuser. | DSL2D28BPHFL |
| 38W 2D | black die-cast aluminium base and clear prismatic diffuser. | DSL2D38BPHFL |
| For white base, replace B with W in the above product code. e.g. DSL2D16BPHFL to DSL2D16WPHFL | W | |
| For opal prismatic diffuser, replace P with O in the above product code. e.g. DSL2D16BPHFL to DSL2D16BOHFL | O | |
| For integral maintained emergency, place EM at the end of the above product code. e.g. DSL2D16BPHFL to DSL2D16BPHFLEM | EM | |
| For integral non-maintained emergency, replace HF with ENM at the end of the above product code. e.g. DSL2D16BPHFL to DSL2D16BPLENM | ENM | |
| For stainless steel tamper proof screws, place SS at the end of the above product code. e.g. DSL2D16BPHFL to DSL2D16BPHFLSS | SS |
Other information
Materials and Design Either black or white, die cast aluminium base, mild steel reflector and either clear or opal prismatic polycarbonate diffuser. Installation The Santos can be either surface or besa box mounted via holes in the rear of the body. Both types use blind location holes on the rear of the fitting. Electrical Cable entry to the body is via two 20.00mm recesses in the rear of the base and two in the side of the base. Electrical connections are made to a 3-way polyamide screwed terminal strip mounted in the base of the luminaire. A fused srewed terminal strip can be provided on request. Classification for Protection and Standards Against electric shock Class 1 protected with earthed metalwork. It is important that this product is electrically installed according to IEE Regulations. Against ingress of dust and moisture IP54 Technical Specification. The Santos range of luminaires is designed and manufactured to meet the requirements of BSEN 60598 2-1.