Access a range of downloadable documents:
Go to Download area
Products / Exterior / Talca
Order Information
| Luminaire | Code | |
|---|---|---|
| 150W | SON-E Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTS150ATL |
| 250W | SON-E Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTS250ATL |
| 400W | SON-E Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTS400ATL |
| 150W | Metal halide Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTH150ATL |
| 250W | Metal halide Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTH250ATL |
| 400W | Metal halide Asymmetric reflector fitting c/w integral gear, timed ignitor & lamp | AFTH400ATL |
| 250W | MBF Asymmetric reflector fitting c/w gear & lamp | AFTM250ATL |
| 400W | MBF Asymmetric reflector fitting c/w gear & lamp | AFTM400ATL |
| For white body place a ‘W’ after the lamp wattage in the order codes above. e.g. AFTS250WTL | ‘W’ | |
| For dusk/dawn photocell place a ‘P’ at the end of the order code above. e.g. AFTS250TLP | ‘P’ |
| Options & Accessories | Code | |
|---|---|---|
| Front wire guard | AFTWG | |
| Adjustable Corner bracket | AFCB2 | |
| Barn door | AFTBD | |
| Adjustable horizontal glare louvre | AFTLV | |
| Glare baffle | AFTGB |
Other information
White or black, dry powder coated die-cast aluminium body. Reflector manufactured from dimpled, ultra high purity anodized specular aluminium. Toughened glass diffuser, galvanised steel mounting bracket and plated steel gear tray. Installation The Talca can be wall mounted via the galvanised steel mounting bracket at the base of the fitting. There are two obrounds 10.0mm x 22.0mm securing holes perpendicular to each other 75.0mm either side of the centre of the bracket and a 10.0mm hole in the centre. An adjustable corner bracket (available on request) can be used in conjunction with the galvanised steel mounting bracket. Electrical Cable entry to the body is via a 20.00mm compression cable gland in the base of the gear housing. Electrical connections are made to a 3-way polyamide screwed terminal strip mounted on the gear tray. A fused srewed terminal strip can be provided on request. Classification for Protection and Standards Against electric shock Class 1 protected with earthed metalwork. It is important that this product is electrically installed according to IEE Regulations. Against ingress of dust and moisture IP65 Technical Specification. The Talca range of luminaires is designed and manufactured to meet the requirements of BSEN 60598 2-1.
Materials and Design