Hilclare Lighting Manufacture Logo

Varas LED

LED Low bay with choice of diffuser

Varas LED Retail & Display Suspended Industrial Light
ORDERING INFORMATION
Power Luminaire Code
Opal PETG
113W LED 735mm length fitting c/w LED engine and driver LBV113T440GF
170W LED 1435mm length fitting c/w LED engine and driver LBV170T440GF
226W LED 1435mm length fitting c/w LED engine and driver LBV226T440GF
Clear Polycarbonate
113W LED 735mm length fitting c/w LED engine and driver LBV113T440CP
170W LED 1435mm length fitting c/w LED engine and driver LBV170T440CP
226W LED 1435mm length fitting c/w LED engine and driver LBV226T440CP
ACCESSORIES / OPTIONS
Options / Accessories Code
Trunking Mounting Brackets LBVTMB
Chain suspension brackets LBVCS
Ceiling mounting*/extended trunking brackets *(Bracket holds the fitting 7.5cm below ceiling) LBVXTMB
3hr integral emergency Add EM to the end of the product code
Dimmable option Add DA in product code. e.g. LBV113T4DA40CP
Wire hanging kit (3m) QRSS2Y3M
Various integral presence/absence/daylight dimming sensors are available

Varas LED

LED Low bay with choice of diffuser

General Description

The Varas LED luminaire is intended to directly replace a standard HID low bay fitting. It is designed to be suspended or trunking mounted. The body is fabricated from white finished mild steel with diffuser options which include clear polycarbonate and opal PETG. The luminaire uses multiple LED strips to produce a very efficient lighting solution. Suitable for many warehouse and factory environments.The rigid steel construction and range of diffusers and various means of fixing make this luminaire suitable for retail areas, factories, warehouses and cold stores.

Other information

Integral 3 hour maintained emergency systems - available on request.
High frequency digital dimming gear - available on request.
Suggested mounting heights 5 -10m.
IP20 - 230 Volts 50Hz - Nominal supply
Integral pir/motion detectors and energy management systems available with the Varas LED

Application

Rigid white polyester pre-coated steel construction
Ceiling, suspension and trunking mounting
Optional integral pir/motion detector and energy management systems
Clear polycarbonate and opal PETG diffuser available
Integral emergency option
230 Volts 50Hz - Nominal supply
Dimmable versions available

Specification

Rigid steel constructed LED luminaire. Clear polycarbonate or opal PETG diffuser, integral emergency plus optional pir/motion detector energy management systems. Surface, suspension and trunking mounting capability.

Product Categories

Varas LED is listed in the following product categories

Connect with us